Os-engines 12CV-R (P) Manual de usuario Pagina 1

It is of vital importance, before attempting to operate your engine, to read the general 'SAFETY INSTRUCTIONS AND WARNINGS' section on pages

Always remove contaminated elements carefully, to ensure that dirt cannot enter the carburettor.AIR CLEANER TYPE 102SINSTALLATION OF AIR CLEANERCarefu

Position the air cleaner correctly, so that it does not foul the cylinder-head or obstruct the needle-valve.INSTALLING THE FILTER ELEMENTThe element i

Glowplug lifeParticularly in the case of very high performance engines, glowplugs must be regarded as expendable Install a plug suitable for the engin

TOOLS, ACCESSORIES, etc.The following items are necessary for operating the engine.FUELUse only top quality methanol-based model engine fuel.For consi

BATTERY INTEGRATED GLOWPLUG HEATERCommercialy available handy glowplug heater in which the glowplug battery and battery leads are integrated. LONG SOC

CARBURETTOR CONTROLS (10E-R)The Needle-Valve:The Mixture Control Screw:The Throttle Stop Screw:Three adjustable controls are provided on this carburet

approx 1mmapprox 0.3-0.5mmThe following procedure is suitable for these engines when the O.S. T-1020 tuned silencer and a fuel containing up to 30% ni

30˚When the engine starts, first allow it to operate in short runs on its very rich starting settings, with the glowplug battery still connected and w

IF THE ENGINE FAILS TO STARTCheck the following:Glowplug battery discharged or glowplug defunct.Fuel not reaching carburettor.Engine flooded. Do not

In this case, turn the Mixture Control Valve clockwise 45~90˚. If, on the other hand, the engine tends to speed up momentarily and then cut out abrupt

CONTENTSSAFETY INSTRUCTIONS AND WARNINGS ABOUT YOUR O.S. ENGINEINTRODUCTION, BASIC ENGINE PARTSINSTALLATION AIR CLEANERNOTES CONCERNING THE RECOIL STA

BALL LINK AND SLIDE VALVE EXTENSIONIt is seldom necessary to separate the slide-valve extension from the slide-valve itself. For cleaning, withdraw th

4.CARE AND MAINTENANCE1.2.3.The minute particles of foreign matter, that are present in any fuel may, by accumulating and partially obstructing fuel f

RACING ENGINE PARTS(71608001)(71605300)(71605100) (72103110)(72103120) (72103020) (72103310) (71530100) (71521000) (72403202) (72403120)(72103130)(7

12CV-R EXPLODED VIEWType of screw C…Cap Screw M…Oval Fillister-Head ScrewF…Flat Head Screw N…Round Head Screw S…Set Screw Not included in 12CV-R(S

12CV-R ENGINE PARTS LISTThe specifications are subject to alteration for improvement without notice.7 2403 1207 2403 2102 1257 0002 1214 0002 1252 000

12CV-RX EXPLODED VIEWType of screw C…Cap Screw M…Oval Fillister-Head ScrewF…Flat Head Screw N…Round Head Screw S…Set Screw Not included in 12CV-RX

12CV-RX ENGINE PARTS LISTThe specifications are subject to alteration for improvement without notice. 102 Cleaner Body 101,102 Filter Elements (6pcs.)

Type of screw C…Cap Screw M…Oval Fillister-Head ScrewF…Flat Head Screw N…Round Head Screw S…Set Screw 12CV-R(P) EXPLODED VIEW1234567890-=qwC.M2.6x

12CV-R(P) ENGINE PARTS LISTThe specifications are subject to alteration for improvement without notice. 102S Cleaner Body 101,102 Filter Elements (6pc

The specifications are subject to alteration for improvement without notice.Type of screw C…Cap Screw M…Oval Fillister-Head ScrewF…Flat Head Screw N

Remember that your engine is not a "toy", but a highly efficient internal-combustion machine whose power is capable of harming you, or other

The specifications are subject to alteration for improvement without notice.10E-R CARBURETTOR EXPLODED VIEW & PARTS LIST2 1481 9502 7881 8202 1481

Displacement Bore Stroke Practical R.P.M. Power output WeightSPECIFICATIONS12CV-R THREE VIEW DRAWING Dimensions(mm)2.11 cc(0.129cu.in.)14.0 m

2090.970.988.8M5x0.84133.8251131.44027.512CV-RX THREE VIEW DRAWING Dimensions(mm) Displacement Bore Stroke Practical R.P.M. Power output Weigh

12CV-R(P) THREE VIEW DRAWING Dimensions(mm) Displacement Bore Stroke Practical R.P.M. Power output WeightSPECIFICATIONS2.11 cc(0.129cu.in.)14.

C Copyright 2000 by O.S.Engines Mfg. Co., Ltd. All rights reserved. Printed in Japan.070101TEL. (06) 6702-0225FAX. (06) 6704-27226-15 3-Chome Imagawa

WARNINGSModel engine fuel is poi-sonous. Do not allow it to come into contact with the eyes or mouth. Always store it in a clearly marked container an

This engine is intended for model cars. Do not attempt to use it for any other purpose.Mount the engine in your model securely, following the manufact

NOTESTo stop the engine, fully retard the throttle stick and trim lever on the trans-mitter, or, in an emergency, cut off the fuel supply by pinching

INSTALLING THE GLOWPLUGCarburettor NOTE:With this engine, the piston will feel tught at the top of its stroke when the engine is cold. This is normal.

ENGINE INSTALLATIONMake sure that the vehicle's engine mounting surfaces are level and in the same plane. Poor installation may cause distortion

NOTE:Where spacers are supplied joined in pairs (see sketch) separate them as shown. Either face may be placed downwards.Avoid forcing the screws. Sec